This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fiber with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved.A particularly good outside diameter tolerance in the range of +0.00mm / - 0.02mm is achieved through a special grinding process. In addition, the rod gets a particularly smooth surface.Ground precision carbon rods are particularly suitable for shafts and guides in the field of linear technology, as well as for all applications for which an exact fit is required. Due to their extremely low thermal expansion, these rods are also often used in the field of measurement technology, for example for measuring probes.
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
This round carbon rod, manufactured using the pultrusion process, has a unidirectional fiber orientation in the longitudinal direction. By using HT carbon fibers with a fiber volume of approx. 65%, a very high level of flexural rigidity is achieved. The surface is black, smooth and slightly shiny.This pultruded rods are subject to general manufacturing tolerances and are not suitable for high-precision mating. You can find precisely fitting rods here: Carbon rods grinded
The fiber volume of the glass fiber round rod, produced in the pultrusion process, is over 60%. The fiber orientation is in the longitudinal direction and is therefore unidirectional.
The fiber volume of the glass fiber round rod, produced in the pultrusion process, is over 60%. The fiber orientation is in the longitudinal direction and is therefore unidirectional.
The fiber volume of the glass fiber round rod, produced in the pultrusion process, is over 60%. The fiber orientation is in the longitudinal direction and is therefore unidirectional.
The fiber volume of the glass fiber round rod, produced in the pultrusion process, is over 60%. The fiber orientation is in the longitudinal direction and is therefore unidirectional.
The fiber volume of the glass fiber round rod, produced in the pultrusion process, is over 60%. The fiber orientation is in the longitudinal direction and is therefore unidirectional.
The fiber volume of the glass fiber round rod, produced in the pultrusion process, is over 60%. The fiber orientation is in the longitudinal direction and is therefore unidirectional.